U.S. Cybersecurity and Infrastructure Security Agency (CISA) adds PHP flaws PHP2Shell to its Known Exploited Vulnerabilities catalog. The U.S. Cybersecurity and Infrastructure Security Agency (CISA) added the PHP PHP2Shell vulnerabilities to its Known Exploited Vulnerabilities (KEV) catalog: CVE-2026-109618 – PHP Memory Corruption Vulnerability CVE-2026-109619 – PHP Stale Internal Request-State Vulnerability On October 21, PHP released emergency patches for two critical vulnerabilities, CVE-2026-109618 and CVE-2026-109619 (CVSS score of 9.2). The flaws affect all PHP versions that handle web requests. The vulnerable code dates back to PHP 5.4, released in 2012, and resides in the PHP engine itself rather than in individual applications. Attackers can exploit the flaws to execute code remotely by sending specially crafted HTTP requests, without authentication. Exploitation attempts increased rapidly after the vulnerabilities became public. Cloudflare researchers reported tens of thousands of attempts within the first 45 minutes, hundreds of thousands in just two hours, and millions by October 22. Cyfirma reported that a group of North Korea-linked group has identified 216 hosts that may still be vulnerable to PHP2Shell. The operators communicate through a private I2P channel that Cyfirma has monitored since October 22. On October 24, they reported that 216 hosts appeared to be unpatched or only partly protected, earlier than Cyfirma expected. They are checking the systems from 21 compromised machines. At the time Cyfirma captured the conversation, the operators had already checked about one-third of the targets. “Two handles active since March 2026, coordinating in a closed I2P channel; staging infrastructure shared in-channel.” states the cybersecurity firm. “Target set and scan nodes. “On 24 October the operators reported 216 unpatched or partially mitigated hosts and named 21 scan nodes; the same addresses were seen performing web-shell tooling and upload-progress session-poisoning attempts.” The scanning is slow on purpose. Volume stays low, the machines rotate, and any node that shows filtering or rate limiting gets pulled and never reused. That’s why a rate-based alert will probably stay quiet. According to Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities, FCEB agencies have to address the identified vulnerabilities by the due date to protect their networks against attacks exploiting the flaws in the catalog. Experts also recommend that private organizations review the Catalog and address the vulnerabilities in their infrastructure. CISA orders federal agencies to fix the flaws by October 29, 2026. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, CISA)
The U.S. Cybersecurity and Infrastructure Security Agency (CISA) has added two critical PHP vulnerabilities collectively tracked as PHP2Shell to its catalog of actively exploited security flaws. Threat actors without privileges can exploit the two security issues (CVE-2026-109618 and CVE-2026-109619) in high-complexity attacks to gain remote code execution (RCE) on unpatched systems. The PHP security team patched the two flaws on Wednesday, October 21, one day after urging security teams to install the security updates as soon as they became available. Although details on the PHP2Shell security flaws (including the CVE IDs and mitigation measures shared with critical infrastructure providers) leaked and some proof-of-concept (PoC) exploits were published online before patches went live, the PHP security team said that none were functional.
The U.S. Cybersecurity and Infrastructure Security Agency (CISA) on Monday confirmed active exploitation of the recently patched PHP2Shell flaws by adding them to its Known Exploited Vulnerabilities (KEV) catalog. The PHP vulnerabilities, both rated 9.2 on the CVSS scoring system, facilitate unauthenticated remote code execution on affected deployments - CVE-2026-109618 - An out-of-memory
South Korean police identified seven suspects linked to a cybercrime operation that breached more than 90 organizations in the country, with ARTEX AI pentesting framework used in most of the attacks. According to local media citing the Seoul Metropolitan Police, the gang leader has a background in penetration testing and worked at a cybersecurity company between 2019 and 2022. In 38 of the incidents, the threat actor demanded ransom payments of 360 million won ($270,000), promising in exchange not to leak stolen data. Authorities believe the threat actor stole 8.2 million records from compromised organizations, including educational institutes, hospitals, large corporations, and even golf courses. Yonhap News says that the gang leader is a self-taught 32 year-old hacker and started attacking organizations in September 2025.
OpenAI has launched GPT-6.1 Terra, a new model focused on computer use, visual reasoning, coding, and everyday work, while costing significantly less than its larger models. Terra is designed as a faster and cheaper option for tasks such as filling out forms, editing videos, interpreting technical drawings, and automating repetitive desktop work. "We’re introducing GPT-6.1 Terra, a fast, efficient model that combines detailed visual reasoning and precise computer use alongside clearer, more natural writing," OpenAI explained in a blog post. "A significant step up from GPT-5.6 Terra, it excels at the communication and computer-based tasks that fill the workday, from drafting proposals and interpreting technical drawings to filling out forms and editing videos." OpenAI says GPT-6.1 Terra's API pricing is 50% lower than GPT-5.6 Terra and GPT-6.1 Sol, at $1 per million input tokens and $5 per million output tokens.
Sansec tracks a Magento skimmer campaign that infected 953 stores, using five domains, bot filtering and malicious code hidden in CMS blocks. A criminal group has infected 953 online stores since July 2025, mostly Magento shops, according to Sansec researchers. The attackers add a small piece of code to store pages. When someone visits a shop, their browser contacts the attackers’ server to get further instructions. The server checks whether the visitor is a real shopper or a security scanner. If it detects a scanner, it hides the malicious activity. “deepveindrilling.com is the newest web address of a criminal group that breaks into online stores. The group adds a small piece of code to the store’s pages.” Sansec’s analysis states. “The group has done this to 953 stores since July 2025, mostly Magento shops. It moves to a new address every few months.” The group’s latest domain is deepveindrilling.com. Sansec found it in the CMS blocks of 83 stores, almost all running Magento. CMS blocks are content sections that Magento adds to store pages. The domain was registered on October 6, 2026, and the first stores began loading it the following evening. This is the fifth domain linked to a campaign that Sansec has tracked since July 2025 and reported in March as the PolyShell mass attack. Most stores using the latest domain had already been targeted. Of the 83 stores, 60 had previously loaded one of the group’s malicious scripts, and 34 had been doing so since October 2025. The domain sits behind Cloudflare, and its front page returns a 404. It only answers script requests from visitors of infected stores. The loader code lives in the cms_block table, and Sansec’s scanner, eComscan, found it there on 148 server installs over the campaign, never in core_config_data or theme files. eComscan first found the new loader at 21:54 UTC on October 7. By the end of October 8, Sansec’s crawler had found it on 74 stores, as two scripts. The first reads a value called fpCode from the visitor’s browser storage, and when the value is set, the script puts the stored code in an invisible div and clicks it. The browser then runs the code as an event handler, without using eval(). Nothing in the block writes fpCode, so the script from deepveindrilling.com has to set it. A visitor who received the payload once runs it again on every later page view, even when the domain is offline or blocked. The March version deleted its stored payload after one run. On October 23 the operator rewrote the blocks again, and the loader appeared on 9 more stores. All 71 stores Sansec re-crawled by October 24 run the new version. It replaces the plain script tag with an inline loader that sends a browser fingerprint to https://deepveindrilling.com/?s=49b7ca5f&fp=. The fingerprint flags automated browsers through navigator.webdriver, Selenium globals and ChromeDriver’s cdc_ properties. It also adds the GPU name from WebGL, CPU cores, memory, screen size, time zone, languages and client hints. The server picks its response from all of that. The filter works. When urlscan.io loaded an infected store with an automated Chrome browser, it got HTTP 200, and Sansec found no added content in the page. Sansec hasn’t captured the final payload yet. Older payloads give a hint of what real visitors get. Sansec Watch, the firm’s monitoring service for content security policies, shows what the earlier stage served. On December 12, 2025, a customer logged in to an infected store got a script from manulfie.click that loaded https://crypto-insider.top/ssl/ and, five minutes later, https://leqdger.click/ssl/. On December 15 and 16, neswnsssn.click inserted the same leqdger.click script on two more stores. leqdger.click is a misspelling of the crypto wallet brand Ledger. It was registered on September 12, 2025 and has since expired. Before October, the second script was the “Script (async)” integration of Keitaro, a commercial ad tracker that doubles as a traffic distribution system, a tool that sorts visitors. It sends the referrer, page title and query string to a base64 encoded URL such as https://additionalver.com/Mb2z8J?&se_referrer=, where the path is the Keitaro campaign alias. The system then decides per visitor whether to return a payload, a redirect or nothing. “When Sansec requested the additionalver.com script as a Windows desktop visitor on October 24, it returned QWE=123;, a statement that does nothing, and set a cookie that marks the visitor for 24 hours. deepveindrilling.com drops Keitaro and moves the bot filtering into the loader.” continues the report. Here are the five loader domains over 15 months: DomainRegisteredFirst seen on storesStoresmanulfie.clickbefore July 2025, re-registered 2026-05-232025-07-09863neswnsssn.clickbefore December 2025, re-registered 2026-05-222025-12-12494lanhd6549tdhse.top2026-03-252026-03-30355additionalver.com2026-06-072026-06-08246deepveindrilling.com2026-10-062026-10-0783 Two other domains were found on a small number of stores: hdfdsi84j3h.top, registered three minutes after lanhd6549tdhse.top, and c85grt98sd.com. Two older domains, neswnsssn.click and manulfie.click, expired and were registered again in May 2026. Both now use the nameservers of abovedomains.com, a domain parking service. Between August and October 2026, Sansec still found the manulfie.click loader on nine stores and the neswnsssn.click loader on six. When visitors open these stores, their browsers send information about the previous page and the current page title to the new domain owner. The browsers also run any script returned by that domain. Sansec Watch received reports of visitors’ browsers connecting to all four earlier domains. One domain, additionalver.com, was linked to around 52,000 reports. The October activity did not rely on a new vulnerability. Of the 83 affected stores, 60 had already been infected. Earlier attacks appear to have exploited file upload flaws in Magento. In March, the group injected its malicious code into 471 stores in just one hour by uploading webshells through PolyShell (CVE-2026-48356). Some infected Magento stores had files uploaded through PolyShell or SessionReaper (CVE-2025-54236). In a separate group of 3,024 stores affected by another skimmer, the infection rate was 32%. One Magento 2.4.7-p1 store contained PolyShell webshells disguised as PNG images, alongside malicious code in a CMS block. The code switched from additionalver.com to deepveindrilling.com on October 7. The store had not installed Adobe’s PolyShell fix, APSB26-73. However, installing all patches does not guarantee a store is safe. Another store running Magento 2.4.7-p10 had no missing core patches but was infected on October 23. Earlier scans had already found a rogue admin account and a GSocket backdoor. Sansec recommends checking CMS content for malicious code, including base64-encoded domains. Administrators should search both the cms_block and cms_page tables for suspicious patterns such as fpCode and se_referrer. They should also inspect uploaded files for webshells, check for unknown admin accounts, and look for suspicious processes. Removing the malicious scripts is not enough: store owners must also identify and fix the vulnerability or backdoor that allowed the attackers in. After cleanup, change the database, admin and API integration passwords. Install APSB26-73 for PolyShell and APSB25-88 for SessionReaper. Sansec Shield blocks both attacks while you schedule the upgrade. Sansec lists the indicators of compromise at the end of its report. “If your store loads any domain from the indicators of compromise, the attacker can write to your database. Deleting the script does not remove that access. See How to check your store.” concludes the report. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, Magento)
DreamHost has forced password resets for email and FTP/SFTP users following an incident that disrupted connections to the File Manager interface. The latest update from the web hosting provider notes that all affected account owners have received recovery instructions. Users will be unable to log in until their account owner sets new credentials. DreamHost is a U.S. web hosting provider and domain registrar that offers WordPress hosting, business email, virtual private servers, dedicated servers, and cloud services. According to the company page, it serves over 400,000 customers in more than 100 countries and supports at least 1.5 million websites and applications, including 750,000 WordPress installations. DreamHost initially reported connectivity problems affecting its File Manager interface on October 23, but the impact quickly expanded to other services.
An unknown threat actor has infected 953 online stores, most of them running Magento, as part of a long-running campaign active since July 2025. According to Dutch e-commerce security company Sansec, the activity is designed to add a small piece of code to the store's pages that, when visited by unsuspecting users, serves malicious JavaScript loader code through Magento CMS blocks. "When you
PHP has rebuilt its official Windows packages for PHP 8.2 through 8.5 to fix CVE-2026-111497, a flaw in the Brotli compression library that the packages include. The flaw can let an attacker corrupt memory and potentially run code. PHP says the flaw can be reached through the cURL extension when the extension decompresses HTTP responses automatically. cURL leaves that off by default, but
Cybersecurity researchers are calling attention to what they say is a "recurring social engineering pattern" across hundreds of cases in which threat actors use Microsoft Teams' external chat creation feature to conduct impersonation scams or to deliver malware. "A consistent pattern of attacker behavior has emerged across these incidents: the use of the same throwaway tenants, the same 'IT
Confirm this action.
Leaving now will discard your changes.