Akira attackers used Safe Mode to disable EDR before deploying ransomware, but memory issues caused the encryptor to fail. An Akira ransomware affiliate broke into a company through an MFA-less SonicWall VPN on August 4, stole credentials and file shares, and then rebooted the compromised host into Safe Mode with Networking to kill the security tools before launching the encryptor. The plan worked on the EDR. It did not work on the ransomware. “After gaining access via an exposed SonicWall VPN, an Akira affiliate rebooted the victim host into Safe Mode with Networking to defeat EDR, a first for this ransomware variant in our telemetry.” reads the report published by Huntress. “In this incident, Safe Mode also broke the ransomware. In its stripped-down memory environment, the Akira process tree hit an out-of-virtual-memory failure seconds after launching.” The attacker also added AnyDesk to the Safe Mode registry before rebooting, so their remote access survived the restart even though everything else didn’t. For ten minutes, the host had no working EDR and Defender’s real-time protection was down. The attack followed Akira’s standard playbook almost exactly: VPN credential spray resolved into a successful login at 03:52 UTC, then two hours of quiet before the operator RDP’d to the domain controller, dumped all Active Directory users and computers with a PowerShell enumeration that disabled truncation to capture every group membership, archived mapped file shares with WinRAR using the same flags documented in previous Akira campaigns, and uploaded the data to an attacker-controlled S3 bucket using s5cmd. Exfiltration happened before any encryption attempt, which matters, because it means the victim can still be extorted even when the ransomware fails. The ransomware failed because Safe Mode limited available memory. About 13 seconds after launching, akira.exe triggered multiple memory errors, apparently overwhelming the stripped-down environment and causing the encryption process to fail. “akira.exe executed at 06:34:29 UTC and spawned its child-process burst at 06:36:21 UTC. About 13 seconds later, the host started throwing memory errors:” continues the report. “Safe Mode boots with a stripped-down environment and constrained virtual memory, and the Akira process tree appears to have starved it, getting the “Out of Virtual Memory” pop-up and the cascade of PowerShell hard errors line up exactly with the moment the payload tried to kick things off.” Defender’s scheduled scan eventually detected akira.exe as Ransom:Win32/Akira.B!ibt, but couldn’t quarantine it while real-time protection was disabled in Safe Mode. The file was only removed after the attacker rebooted back to normal mode, restoring Defender’s protections, at which point their own anti-EDR move undid itself. Huntress notes that Snatch and AvosLocker have abused Safe Mode for years, but this is the first time the company observed Akira using it. The more uncomfortable takeaway is that a host with more RAM or a larger page file might have given the encryptor enough memory to run successfully in Safe Mode. Akira’s developers could also reduce the payload’s memory footprint to make Safe Mode launches reliable, which means the same lucky failure won’t necessarily repeat. The detection guidance is specific: alert on msconfig.exe or bcdedit activity, watch for Kernel-Boot Event ID 27 with a SAFEBOOT load option, Kernel-General Event ID 12 with BootMode=2, and third-party services stopping. Also watch for remote-access tools being added to the Safe Mode service registry, that’s the tell that the operator is planning to maintain access through the reboot. “The takeaway is a little uncomfortable. While Safe Mode blinded our controls, it may also have prevented the encryption it was meant to enable. That’s a lucky side effect of the attacker’s own mistake in these circumstances, not a defence you can plan around.” concludes the report. “Ultimately, this could be a case of winning the battle, but not the war. It’s possible that a host with more physical memory or a larger page file might give akira.exe enough virtual memory to encrypt the endpoint in Safe Mode. Akria’s developers or affiliates could retool the encryptor to reduce its memory demands or make its Safe Mode launch sequence more reliable, meaning that the same failure may not occur in a future intrusion.” Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, Akira Ransomware)
GitLab has released security updates to address a critical vulnerability impacting its Community Edition (CE) and Enterprise Edition (EE) software that, under certain conditions, could allow an unauthenticated attacker to remotely modify or delete public projects and user data. The flaw, tracked as CVE-2026-19478, has been rated Critical by GitLab and assigned a CVSS score of 9.4. Released on
A critical security flaw has been disclosed in Forminator Forms, a WordPress plugin with more than 600,000 active installations, that could be exploited to achieve arbitrary code execution on susceptible sites. The vulnerability, tracked as CVE-2026-15748, is rated 9.8 out of 10.0 on the CVSS scoring system. It was discovered and reported by a security researcher who goes by the online alias "
Cybersecurity researchers have attributed the exploitation of a newly patched security flaw in Broadcom VMware vCenter to a suspected China-nexus advanced persistent threat (APT). The attacks involve the exploitation of CVE-2026-59310 (CVSS score: 9.8), a severe directory-traversal vulnerability in the VMware vCenter server that could be weaponized by a malicious actor to execute arbitrary code
Cryptocurrency hardware wallet provider SafePal is warning of a data breach affecting about 39,798 customers after a flaw was exploited to steal customer order information, and a threat actor is now claiming to be selling the stolen data. SafePal says the breach impacts customers who placed orders between March 2, 2025, and April 11, 2026, exposing their names, email addresses, shipping addresses, phone numbers, and purchase information. The company says the breach did not expose customers' wallet seed phrases, private keys, passwords, bank account information, payment card numbers, government-issued identification numbers, or other credentials. "No evidence has been found that the incident itself compromised access to SafePal wallets or funds," SafePal said in a security advisory published Sunday.
Claude is experiencing a major outage, with users reporting login problems and degraded performance across several Anthropic services. The incident began on August 16, 2026, at around 21:58 UTC, and is affecting Claude.ai, Claude Code, and Claude Cowork. According to Anthropic’s status page, the company first said it was investigating an issue preventing some users from authenticating to Claude.ai, Claude Code, and Claude Cowork. A few minutes later, Anthropic reported a broader service disruption involving degraded performance on Claude.ai and platform.claude.com. For users, the outage can result in problems signing in, Claude failing to load, requests not completing, or other errors when using the affected services. Anthropic’s status page currently classifies Claude.ai, Claude Code, and Claude Cowork as experiencing a major outage. Claude Console and the Claude API are currently listed as operational.
France’s tax agency says hackers stole data on 678,000 taxpayers, including income and tax details, in a sophisticated cyberattack. A threat actor claimed to have breached France’s tax agency in late June. France’s tax administration confirmed that a cyberattack exposed personal data of 678,000 individuals and businesses, prompting an immediate criminal investigation. The cybercrime unit of the Paris Public Prosecutor’s Office has opened a probe and handed it to OFAC, France’s dedicated cybercrime fighting office. Tax officials described the attack as more sophisticated than anything they’d faced before. “The attack allowed hackers to extract data relating to 678,000 users of France’s tax system, including both private individuals and companies.” reports French media RFI. “Tax authorities said the incident was more complex than cyberattacks they had faced in the past, potentially renewing concerns over the security of government information systems following a series of recent breaches involving other public bodies.” The Directorate-General for Public Finances (DGFiP) stressed that the stolen data doesn’t grant access to taxpayers’ secure accounts on impots.gouv.fr. That’s a meaningful distinction, but income figures, tax rates, and family circumstances are exactly what an attacker needs to make a phishing email or phone call sound credible enough to extract a password or bank account number. “Officials said those affected would be contacted from early next week, with particular emphasis on alerting them to the potential risk of identity theft and fraudulent attempts to obtain further personal information.” continues RFI. French authorities did not disclose technical details about the cyberattack or its motivation. The breach follows recent attacks on systems linked to ANTS, the national secure documents agency, and INSEE, France’s statistics authority. Three government bodies hit in quick succession is a pattern, not a coincidence. For businesses, the exposed data was considered less sensitive, SIREN registration numbers, business addresses, and the address of the authorized representative. Public Accounts Minister David Amiel has asked the DGFiP to start notifying affected taxpayers from Monday and requested proposals on how to strengthen security procedures. Investigators still need to establish how the attackers got in, who they are, and whether the data has already been sold or used. Anyone contacted about this breach should treat follow-up requests for passwords or banking information as fraudulent regardless of how official they sound. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, France’s tax agency)
Attackers are actively exploiting a maximum severity SAP Commerce Cloud vulnerability, tracked as CVE-2026-58231, just days after SAP released a patch. A critical SAP Commerce Cloud vulnerability, tracked as CVE-2026-58231 (CVSS score of 10.0), is under active exploitation just days after SAP released a patch. The flaw stems from insufficient authorization checks and input validation. “SAP Commerce Cloud allows an unauthenticated attacker to abuse a default authentication client and submit specially crafted input to certain functions lacking sufficient validation.” reads the advisory. “Successful exploitation could enable arbitrary code execution and compromise internal components, resulting in high impact on confidentiality, integrity, and availability of the application.” An unauthenticated attacker can abuse a default authentication client and send crafted input to vulnerable functions, potentially achieving arbitrary code execution and compromising internal components. Researchers at Defused Cyber observed exploitation attempts against honeypots only three days after the patch was released. The researchers pointed out that this vulnerability has no public PoC and had not been known to be exploited prior to their discovery. First exploitation attempts against CVE-2026-58231 (unauth RCE in SAP Commerce Cloud, CVSS 10.0) is now hitting our honeypots – 3 days after patch day. This vulnerability has no public PoC and is not known to be exploited. View the full payload https://t.co/GXFaqggV8a pic.twitter.com/zMJuo45Ahx — Defused (@DefusedCyber) August 14, 2026 The attackers behind the current exploitation remain unknown. However, previous critical SAP flaws have been exploited by China-linked APT groups, including UNC5221 and UNC5174, and ransomware gangs. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, SAP Commerce Cloud)
Oil giant Shell has confirmed it is investigating a potential security incident after the Clop ransomware gang claimed it stole 89GB of data. Shell is a British multinational energy conglomerate and one of the world's top three oil and gas companies, after Chevron and ExxonMobil. It has 85,000 employees in more than 70 countries and operates a massive network of tens of thousands of service and recharge stations that serve over 20 million customers daily. According to a recent post on Clop's dark web data leak site, the allegedly stolen files include engineering drawings, scans of facility testing reports, photos of the facilities, and project plans. "We are aware of a potential incident. We are working with our security teams and relevant experts to investigate," a Shell spokesperson told BleepingComputer when asked to confirm Clop's data theft claims.
Cybersecurity researchers have detailed a post-exploitation technique that enables the Chrome DevTools Protocol (CDP) inside a running Google Chrome or Microsoft Edge process on Windows, allowing an operator to access cookies, saved data, and authenticated browser sessions. The technique assumes that an operator already has code execution on the Windows host and does not involve
Confirm this action.
Leaving now will discard your changes.