The U.S. Cybersecurity and Infrastructure Security Agency (CISA) warned that hackers are exploiting a critical-severity remote code execution (RCE) flaw in the Windows Internet Key Exchange (IKE) Service Extensions component. Also known as MS-IKEE, this is a set of additional capabilities Microsoft added to the IKE Protocol, including authentication via cryptographically generated addresses (CGAs), denial-of-service protection, and easier interoperability with non-Internet Protocol Security (IPsec)–capable peers. Tracked as CVE-2026-33824, this RCE vulnerability impacts all supported Windows 10, Windows 11, and Windows Server releases, and it allows attackers without privileges to gain code execution by sending maliciously crafted packets to unpatched Windows systems through UDP ports 500 or 4500.
Microsoft tracked over 30 MacSync Stealer domains by focusing on behavioral patterns, revealing a campaign targeting passwords, keys, wallets and other data. Domain blocking is a losing game when the thing you’re blocking can register a new domain faster than you can add it to a list. That’s the exact problem Microsoft Defender Experts ran into while tracking MacSync Stealer, a macOS-focused information stealer that RST Cloud first flagged for swapping out its command-and-control infrastructure almost immediately after getting publicly outed. Microsoft detailed how its experts stopped chasing individual domains and started tracking the behaviors that stayed constant underneath them. Instead of tracking individual domains, Microsoft looked at recurring request patterns, HTTP headers and other behaviors. This allowed its researchers to link more than 30 domains to the same campaign and determine that the infrastructure was doing more than just sending commands to infected Macs. It was also being used to collect, stage and exfiltrate stolen data. “MacSync Stealer is a macOS-focused information stealer that relies on changing infrastructure to deliver payloads, communicate with compromised devices, and exfiltrate data. Earlier reporting by RST Cloud identified the threat through a limited set of domains and documented rapid command-and-control (C2) replacement after public disclosure.” reads the report published by Microsoft. “Microsoft Defender Experts expanded that view by correlating recurring endpoints and network behaviors across the activity. This behavior-led approach connected more than 30 domains and showed that the infrastructure supported more than C2 communication, extending into active collection, staging, and exfiltration.” The infection chain starts with a trick rather than an exploit. Victims get social-engineered through a technique known as ClickFix, tricked into pasting or running commands directly in macOS Terminal, and once that shell session fires, curl pulls down attacker-controlled payload content from a path formatted as /curl/[token]. Then, native macOS tools decode and unpack the payload, and an AppleScript-driven layer takes over, blending Unix commands like sh, cp, rm, and killall with osascript calls that make the whole chain look more like ordinary system scripting than malware. Once active, the stealer focuses on valuable data. The malicious code looks for macOS Keychain data, saved browser passwords and cookies, SSH keys, AWS credentials, Kubernetes configurations and files in common user folders. It also searches for Ledger and Trezor wallet data, showing that the malware targets users with valuable credentials and assets rather than simply collecting random browser history. What actually confirms exfiltration, rather than just suspicious traffic, is the upload mechanism itself. Collected data gets staged under temporary paths, compressed into an archive, split into chunks, and pushed out through HTTP PUT requests carrying parameters like upload_id, chunk_index, and total_chunks. “The staged archive was uploaded through rotating infrastructure using curl and HTTP PUT requests. Observed requests included –data-binary, API-key headers, macOS User-Agent string, upload_id values, chunk_index values, and total_chunks parameters.” states Microsoft. “These upload traits confirmed active data exfiltration and provided durable hunting pivots even when domains rotated. “ The researchers pointed out that the exfiltration method stays recognizable even when the destination keeps changing. RST Cloud’s follow-up work backs up how consistent this infrastructure actually is under the surface. Using the same recurring URI patterns, RST Cloud surfaced eleven additional candidate domains and found a static API-key value shared across four confirmed command-and-control domains, even while the build token attached to each deployment kept rotating. A shared static key sitting inside otherwise rotating infrastructure is exactly the kind of detail that makes automated evasion look less impressive up close. The attack wraps up with cleanup, deleting temporary archives, staging folders, and lock files after the upload completes. Microsoft notes this reduces what’s left sitting on disk, but it doesn’t erase the behavioral sequence itself. “After exfiltration, the malware removed temporary archives, staging folders, lock files, and other artifacts. Although this cleanup reduced on-disk evidence, the sequence of archive creation, chunked upload, and deletion can still provide a useful behavioral correlation for defenders.” concludes Microsoft. For anyone defending Mac fleets, the practical takeaway here isn’t a list of domains to block, since that list will be stale within days. It’s building detection around the recurring shape of the attack itself: shell sessions spawning curl with those specific flag patterns, osascript chaining rapidly into network activity, and archives appearing under /tmp/sync* right before outbound PUT traffic starts. Chase the pattern, not the address, because the address was never going to sit still long enough to matter. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, malware)
U.S. Cybersecurity and Infrastructure Security Agency (CISA) adds Apple macOS, Microsoft SharePoint, Broadcom VMware vCenter, and Microsoft IKE flaws to its Known Exploited Vulnerabilities catalog. The U.S. Cybersecurity and Infrastructure Security Agency (CISA) added the following vulnerabilities to its Known Exploited Vulnerabilities (KEV) catalog: CVE-2026-33824 (CVSS score: 9.8) – Microsoft Internet Key Exchange (IKE) Service Extensions Double Free Vulnerability CVE-2026-55040 (CVSS score: 9.1) Microsoft SharePoint Weak Authentication Vulnerability CVE-2026-59310 (CVSS score: 9.8) Broadcom VMware vCenter Path Traversal Vulnerability CVE-2026-65400 Apple macOS Improper Authentication Vulnerability CVE-2026-33824 is a Windows Internet Key Exchange (IKE) Service Extensions Remote Code Execution Vulnerability. This critical flaw in Windows IKE service extensions could allow remote attackers to execute code on affected systems. Systems with IKE enabled are at risk, though blocking UDP ports 500 and 4500 can reduce exposure from external threats. However, internal attackers may still exploit it for lateral movement, so rapid patching is strongly recommended. CVE-2026-55040 is a critical SharePoint authentication bypass. An unauthenticated attacker can exploit weaknesses in JWT validation to forge tokens and impersonate any SharePoint user, including administrators. “A critical authentication bypass vulnerability exists in SharePoint Server Subscription Edition’s JWT token validation pipeline. The root cause is a chain of four distinct weaknesses that, when combined, allow an unauthenticated remote attacker to forge a valid JWT and impersonate any SharePoint site user.” wrote Rapid7. The exploit chain works by sending a JWT with “alg: none” in the outer header so no signature is required, using SharePoint’s own STS certificate thumbprint to resolve a signing key without verification, and then passing a non-empty but never-verified signature like “AAAA.” The result is a fully forged token that SharePoint accepts as legitimate. Defused researchers observed attackers using the Rapid7 POC for CVE-2026-55040 against our SharePoint their honeypots. CVE-2026-59310 flaw is a Path Traversal Vulnerability that allows an attacker with network access to execute arbitrary code. “VMware vCenter contains a directory traversal vulnerability in the Syslog server. Broadcom has evaluated the severity of this issue to be in the Critical severity range with a maximum CVSSv3 base score of 9.8.”states the advisory.”A malicious actor with network access to vCenter may exploit this issue to execute arbitrary code.” CVE-2026-65400 is an Improper Authentication Vulnerability that sits in macOS’s built-in Screen Sharing feature, the remote desktop tool baked into every Mac.On August 15, 2026, the Dutch National Cyber Security Centre confirmed active exploitation of a critical macOS authentication flaw, less than two weeks after Apple shipped the fix. Apple’s fix improved how the system manages authentication state, closing a gap that let attackers on the network authenticate to Screen Sharing without valid credentials at all. Apple patched this issue with the release of macOS Tahoe 26.6.1, macOS Sequoia 15.7.9, and macOS Sonoma 14.8.9, crediting researcher Alfredo Pesoli (@__rev) at Bynario Atlas (bynar.io) for the discovery. “An attacker on the network may be able to authenticate to Screen Sharing without valid credentials” reads the advisory. According to Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities, FCEB agencies have to address the identified vulnerabilities by the due date to protect their networks against attacks exploiting the flaws in the catalog. Experts also recommend that private organizations review the Catalog and address the vulnerabilities in their infrastructure. CISA orders federal agencies to fix the flaws by August 21, 2026 Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, CISA)
Comcast is promoting WiFi-based motion detection as a part of its new Xfinity Shield home protection platform, allowing routers and wireless devices to detect people moving through a home without cameras or motion sensors. This feature was announced as part of a new Xfinity Shield product offering on Tuesday, a new application suite that combines cybersecurity, physical home monitoring, and family safety features through Xfinity WiFi and the Xfinity app. Part of this new offering is WiFi Shield, which is included at no additional cost for Xfinity Internet customers with compatible gateways. It combines Xfinity's CyberSecure network protection, Family Settings, and WiFi Motion, with Home Watch, Away Watch, and Dark Watch modes used to control when notifications are generated. Comcast is also launching Shield Select for $15 per month, which adds an indoor camera, door/window sensor, cloud video storage, and 24/7 urgent response functionality.
We provide guidance for preparing for and mitigating large-scale credential attacks, focusing on recent campaigns targeting security vendors' devices. The post Threat Brief: Mitigating Large-Scale Credential Attacks (Updated August 18) appeared first on Unit 42.
Security controls can block a familiar attack method while missing quieter ways to achieve the same objective. Picus Security's Blue Report 2026 shows how prevention rates can vary dramatically by technique and why behavioral testing is needed to uncover those gaps.
Microsoft says some users are experiencing issues searching in Microsoft 365 apps, including Outlook on the web, Outlook desktop, SharePoint Online, and OneDrive. According to an incident report seen by BleepingComputer and tracked under MO1456424 in the Microsoft 365 Admin Center, the root cause is what Microsoft describes as a recent deployment that causes resource utilization problems. "Impact is specific to some users served through the affected infrastructure who are attempting to search for content in SharePoint Online, OneDrive, Outlook on the web, or Outlook desktop," Microsoft said. "Our investigation identified that a recent deployment introduced a resource utilization inefficiency issue, leading to impact." Microsoft says it has already developed a fix and deployed it to reduce resource pressure and restore service for all affected Microsoft 365 users.
Microsoft announced that it removed the Windows Management Instrumentation Command-line (WMIC) tool from Windows 11 24H2 and 25H2, as well as from Windows 11 beta builds released this week. WMIC is a legacy built-in Windows command-line utility that helps interact with the Windows Management Instrumentation (WMI) system using text commands. This move is part of a process announced in September, when the company said that WMIC will be removed after upgrading to Windows 11 25H2 and later. Microsoft deprecated WMIC in Windows Server 2012 (in 2016) and Windows 10 21H1 (in 2021), and it converted it into a Feature on Demand (FoD) starting with Windows 11 22H2 (in 2022), and announced in January 2024 that it would be removed altogether after first disabling it by default. "Windows Management Instrumentation Command-line (WMIC) has been removed in this release. This change is part of the ongoing deprecation and removal of WMIC from Windows," Microsoft noted on Monday.
U.S. Cybersecurity and Infrastructure Security Agency (CISA) adds a Ray-Project Ray vulnerability to its Known Exploited Vulnerabilities catalog. The U.S. Cybersecurity and Infrastructure Security Agency (CISA) added a Progress LoadMaster vulnerability, tracked as CVE-2025-62593 (CVSS score of 9.4), to its Known Exploited Vulnerabilities (KEV) catalog. CVE-2025-62593 is a critical remote code execution (RCE) vulnerability in Ray, an AI compute engine. Versions before 2.52.0 insufficiently protected the Ray dashboard/API against browser-based attacks. Its defense relied on checking whether the HTTP User-Agent header started with “Mozilla”, but browsers can modify this header. By combining this weakness with DNS rebinding, an attacker could potentially execute arbitrary code on a developer’s machine simply by getting them to visit a malicious website or view a malicious advertisement while running Ray. The vulnerability affects Firefox and Safari. Ray 2.52.0 fixes the issue. “This vulnerability is due to an insufficient guard against browser-based attacks, as the current defense uses the User-Agent header starting with the string “Mozilla” as a defense mechanism. This defense is insufficient as the fetch specification allows the User-Agent header to be modified.” reads the advisory. “Combined with a DNS rebinding attack against the browser, and this vulnerability is exploitable against a developer running Ray who inadvertently visits a malicious website, or is served a malicious advertisement (malvertising).” “An attacker exploited a code injection vulnerability in Ray AI Compute Engine via a DNS rebinding attack, leading to remote code execution. This allowed the attacker to escalate privileges within the system, move laterally across the network, establish command and control channels, exfiltrate sensitive data, and ultimately disrupt operations.” reads the analysis published by Aviatrix. According to Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities, FCEB agencies have to address the identified vulnerabilities by the due date to protect their networks against attacks exploiting the flaws in the catalog. Experts also recommend that private organizations review the Catalog and address the vulnerabilities in their infrastructure. CISA orders federal agencies to fix the vulnerability by the end of this week, on August 20, 2026. Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, CISA)
Evooo1Bot is a Mirai-based Linux botnet that hijacks routers and IoT devices for DDoS attacks, credential theft and criminal proxy services. Fortinet’s FortiGuard Labs disclosed Evooo1Bot in mid-August, a previously undocumented Linux botnet that’s been active since July 2026. The bot borrows Mirai‘s DDoS engine but adds encrypted command-and-control communications, an SSH brute-force scanner, a credential sniffer, and a SOCKS5 proxy module on top. “FortiGuard Labs has been tracking a previously undocumented Linux botnet family, which we have named Evooo1Bot. The name derives from the hardcoded string “evooo1” found in every binary.” reads the report published by Fortinet. “While the malware reuses the DDoS engine from the publicly leaked Mirai source code, it extends the original framework with numerous capabilities, including encrypted C2 communications, an SSH brute-force scanner, a SOCKS relay module, a credential sniffer, and an integrated exploit arsenal targeting multiple known vulnerabilities.” The botnet targets 18 known CVEs, some of them dating back to 2007, including: CVE-2007-3010: Alcatel OmniPCX Enterprise Remote Code Execution Vulnerability CVE-2016-6277: NETGEAR Multiple Routers Remote Code Execution Vulnerability CVE-2018-14558: Tenda AC7, AC9, and AC10 Routers Command Injection Vulnerability CVE-2019-14931: Mitsubishi Electric Europe B.V. ME-RTU devices and INEA ME-RTU devices remote Command Injection vulnerability CVE-2020-10987: Tenda AC1900 Router AC15 Model Remote Code Execution Vulnerability CVE-2021-46422: Telesquare SDT-CW3B1 Command Injection vulnerability CVE-2022-37055: D-Link Routers Buffer Overflow Vulnerability CVE-2024-29269, Telesquare TLR-2005KSH Command Injection Vulnerability CVE-2025-10123, D-Link DIR-823X Command Injection Vulnerability CVE-2025-55583: D-Link DIR-868L B1 router Command Injection Vulnerability The bot communicates exclusively over port 443, which is intentional: the traffic blends into expected HTTPS flows at the network perimeter. After gaining initial access through one of its exploit modules or via brute-forced SSH credentials, the bot runs a loader script that clears Bash history to erase evidence of the intrusion before pulling the architecture-appropriate binary from an external server. The breadth suggests the operators are scanning opportunistically for anything unpatched rather than targeting specific organizations. “This capability significantly increases the value of an infected host to attackers. The victim’s IP address can be used to disguise malicious traffic, bypass geographic restrictions, or provide access to internal networks through an already compromised machine.” continues the report. “In larger botnets, the same functionality could also be used to build a distributed proxy infrastructure, enabling anonymous traffic forwarding or monetization through residential and enterprise proxy services.” Evooo1Bot stands out because of its proxy module. A network of compromised routers, cameras, and firewalls acting as SOCKS5 relays is a valuable commodity; operators can use it themselves to obscure attack traffic, or sell access to other criminals looking for residential or enterprise IP addresses that don’t trigger geographic blocks. “Unlike typical botnet commands that focus on downloading payloads or launching attacks, the !socks module turns an infected host into a SOCKS5 proxy that the operator can use as a network relay. It supports two operating modes. In direct mode, it opens a SOCKS5 listener on the infected host on the default TCP port 1080 and waits for incoming client connections. The implementation first attempts to create a dual-stack IPv6 listener and falls back to IPv4 if that fails. Each accepted client is then passed to the session handler for proxying.” continues the report. “The botnet also implements a reverse relay mode. Instead of exposing a listening port, the bot establishes an outbound encrypted connection to an operator-specified relay server. This persistent control channel listens for commands such as RELAY_NEW:<session_id>, which indicate that a new proxy session should be created.” After establishing C2 contact, the bot accepts commands covering the full post-compromise toolkit: file upload and download, interactive shell access, persistence installation, binary updates, HTTP Basic Auth and Cookie header interception, DDoS over DNS, TCP, and UDP, and the HTTP exploit dispatcher. The credential sniffer intercepts authentication headers in transit, so any HTTP Basic Auth credentials passing through an infected device can be captured without any additional effort from the operator. If you’re still running devices with unpatched firmware from the CVE list above, or if any of your edge hardware is using default SSH credentials, Evooo1Bot is already scanning for you. “Beyond traditional botnet functionality, it features encrypted C2 communications, multiple layers of string obfuscation using AES-256-CTR, ChaCha20, and XOR-based key derivation, as well as a 28-command remote administration interface.” concludes the report. “These capabilities place Evooo1Bot well beyond the technical baseline of conventional Mirai-derived malware.” Follow me on Twitter: @securityaffairs and Facebook and Mastodon Pierluigi Paganini (SecurityAffairs – hacking, Evooo1Bot botnet)
Confirm this action.
Leaving now will discard your changes.