Japan Airlines (JAL) has announced that a data breach at Amadeus’s Passenger Service System exposed the data of about 92,000 customers. JAL Group, which operates the airlines JAL and Japan Transocean Air, uses the system to handle passenger reservations, ticketing, and check-in. According to its announcement, Amadeus notified the airline on October 23, 2026, that unauthorized access to its systems occurred between August 10, 2023, and September 23, 2026. As a result of this lengthy breach, the threat actor accessed reservation codes (PNRs), names, flight dates, routes, and travel classes for approximately 90,000 customers. An additional 2,000 customers had the above data types exposed, plus their email addresses, phone numbers, passport numbers, nationalities, frequent flyer numbers, and flight, ticket, and seat numbers.
A fake cryptocurrency trading app called Padre Terminal, previously available on the Apple App Store for iOS devices, has been linked to the theft of approximately $23,000 from 27 Solana wallets. Blockchain investigator Iris confirmed that one victim was compromised through the malicious App Store app, but has not determined how the other affected wallets were compromised. The researcher says the app drains wallets after unsuspecting users import their private keys into it. Padre was a cryptocurrency trading platform, mainly used to buy and sell meme coins on Solana. It was later renamed Terminal by pump.fun, a platform focused on creating, buying, and selling cryptocurrency “meme coins” on the Solana blockchain. Iris says the legitimate Padre trading service, now Terminal by pump.fun, is web-only, so any mobile apps impersonating it, including the one previously available on the App Store, are malicious.
A flaw in Telegram for Android could be chained with two other bugs to take full control of a victim's phone through a voice call, once the victim answered, according to security startup NebuSec. The attacker needed only an ordinary Telegram account. Telegram fixed the flaw in version 12.10.4 of the app, released in late September, and NebuSec disclosed it on October 29. Combined with an
Third-party Android app stores can now apply to Google for permission to install apps with one tap, without Android's usual confirmation screens, and to update them in the background. To qualify, a store must pass identity checks and send Google its full catalog, along with every new app and update, for ongoing malware scanning. Approved stores get the features from December 1, but only on
PHP2Shell shows how quickly attackers can exploit critical vulnerabilities, often before organizations have time to patch. Token Security explains why limiting the access of service accounts, API keys, and AI agents is just as important as fixing vulnerabilities to reduce the damage from a breach.
Background Network-connected surveillance cameras are now widespread in both home and enterprise environments, so securing them is essential to safeguarding physical spaces and sensitive assets. As these devices continue to gain new features and network connectivity capabilities, vulnerabilities in their implementation can have significant security implications. During our research, we discovered a denial-of-service vulnerability that affects Intelbras IP cameras systems. The flaw resides in a firmware update endpoint that is accessible without authentication and allows anyone with access to the local Wi-Fi network to knock cameras offline. A single request disrupts the camera for only about a minute, but sending periodic requests keeps the device offline indefinitely. We reported the issue to Intelbras, monitored the remediation process, validated the fix in the new firmware, and will now demonstrate the exploitation procedure step-by-step. Following our notification, Intelbras patched the vulnerability and released updated firmware (R.260804) along with update instructions. A candidate ID of CAN-2026-2035970 has been assigned by MITRE following submission, pending the final CVE assignment. Additionally, the Intelbras team recently informed us that MITRE has classified the vulnerability as Medium, assigning it a score of 5.1 under the CVSS 4.0 framework. The issue discussed in this article is no longer present in the latest firmware version. Firmware Intelbras provides firmware files on its official website. While users can manually install these updates via an SD card, the cameras also natively support firmware upgrades over the local network via their web interface and mobile app. We obtained the firmware version v240927 for the iM3B-C camera, which was the latest available version at the time of our research. According to Intelbras, the same firmware is also compatible with the iMX C, iM4 C, iM5 SC, iME 360 C, and iM7+ FC models. Below, we can view the firmware version and the camera model used as an example. To provide context, we will explain how the camera’s authentication mechanism works and why it is relevant to accessing the camera’s endpoints. The main firmware component is an ARM binary named sonia, responsible for controlling the kernel drivers used by the camera hardware, authentication, and livestream recording, among other things. How authentication works The global.login RPC method handles authentication at the /RPC2_Login endpoint. First, the client, such as the mobile app or a custom script, sends the username and an empty password. The camera responds with an authentication challenge (a set of values to verify the password without transmitting it). This response returns a temporary session, the encryption type in the encryption field, a random value, and a realm (authentication scope). At this stage, a false response is normal and does not indicate a failed login, as the authentication process is not yet complete. Next, the client calculates the response password from the authentication challenge. It first generates an MD5 (username:realm:original_password) hash as the base. It then calculates a second MD5 (username:random:first_md5) hash, where first_md5 is the result of the previous step. To complete the authentication, the client sends this final result back to /RPC2_Login in a second global.login call, passing the username, calculated password, and temporary session ID. If the login is accepted, the camera returns true and a new, authenticated session. This session must be used for all subsequent RPC calls, including the camera’s other endpoints, for example, the one that reboots the device or those that expose sensitive information. Affected endpoint The affected endpoint is the firmware upgrade route http://<ip_address>/firmwareUpgrade_service/Demo, which lacks authentication checks; furthermore, it fails to verify whether the firmware is actually valid before initiating the upgrade process. This creates a serious issue because the upgrade requires the camera to reboot, and that is precisely when the problem occurs: the camera enters reboot mode and eventually shuts down, appearing offline to the user and anyone who has the camera registered on their device. PoC: vulnerability exploitation Now that we have outlined how the vulnerability works, we will use a Python script on an iM3B-C camera to exploit it for demonstration purposes. The exploit contacts the camera’s endpoint to upload firmware. Below, we can see sonia creating the endpoint responsible for the firmware upgrade. Next, the exploit will hit the endpoint and cause the camera to reboot. Consequently, mobile phones running the Intelbras app will lose connection with the registered device. Below, we can see the camera operating normally: the green light is on and the app is showing it is available for viewing. The camera is online After the exploit executes, we can see the effects: the camera goes offline and loses connection to the registered devices. The camera is offline The exploit is quite simple: it sends an HTTP POST request with the firmware, which causes the camera to accept the request and initiate the reboot process. It does not matter whether the firmware is original; the reboot process will start regardless. New firmware version After we notified Intelbras about this flaw in the endpoint implementation, the company contacted the OEM vendor. As a result, a new firmware version was released that requires authentication to initiate an update through this endpoint. Below, we can compare the new firmware, which validates cookies and session data, with the old firmware, which performed no authentication checks and proceeded directly to the update routine. Real risk An attacker can remotely trigger the camera firmware upgrade and reboot process without authenticating or supplying a valid firmware image. This may cause the device to go offline, which results in a denial-of-service condition preventing legitimate users from accessing live monitoring or managing the camera. The potential impact is significant due to the number of affected users. The Intelbras Mibo Smart app, which the company provides to connect and manage the devices mentioned in this report, has over 4,000,000 downloads. Brazil represents the largest user base, followed by Paraguay, Ecuador, Colombia, Argentina, Chile, Peru, Bolivia, Uruguay, and Venezuela. As a result, exploitation of this issue affects a large number of users. Takeaways This is a medium-severity vulnerability that Intelbras is already aware of. The issue has been addressed in a newer firmware release (R.260804 along with update instructions), which mitigates this attack vector. Because the vulnerability directly affects the availability and normal operation of the affected cameras, it is highly recommended that users verify the firmware version currently installed on their devices and update to the latest available version as soon as possible. Keeping the firmware up to date is an essential security practice, especially for internet-connected surveillance devices, as outdated versions may remain exposed to known vulnerabilities.
A credit card skimming group reportedly compromised a shared analytics script used by e-commerce platform Convertr to steal shoppers’ payment data during checkout. The campaign was identified on October 24 and has been attributed to a Brazilian gang, active since at least July 2024, that focuses on infecting online stores running Magento, OpenCart, and WooCommerce platforms. Convertr is a Brazilian e-commerce platform that powers online stores and checkout systems for dozens of major fashion brands in the country, handling R$2 billion ($370M) in sales. E-commerce security firm Sansec says that the attacker modified the Plausible tracker file hosted on a self-managed server operated by Convertr. Ecommerce cybersecurity company Sansec says that the attacker modified the tracker file on a self-hosted server for Plausible, an open source alternative to Google Analytics, managed by Convertr.
Microsoft has fixed a flaw in its Authenticator app for Android that let a malicious app with no permissions pose as a trusted Microsoft app, such as Teams, and collect sign-in tokens for a victim's work account. Microsoft tracks the flaw as CVE-2026-80097 and fixed it in Authenticator for Android version 6.2606.4246, so anyone using the app should update. In the researchers' tests,
French energy giant ENGIE, one of the world's largest power and natural gas providers, confirmed that attackers stole customer data after breaching a marketing platform used by business partners. ENGIE operates in renewable energy, infrastructure, and customer energy supply in 30 countries, employs over 90,000 people, and reported €71.9 billion in revenue last year. An ENGIE spokesperson told BleepingComputer that it cut off the attackers' access to the compromised platform and that they didn't breach the company's internal systems. "ENGIE's internal IT systems were not compromised. ENGIE recently identified unusual data access activity within a tool used by partners as part of their customer prospecting activities and the marketing of energy offers," the spokesperson said. The ENGIE spokesperson didn't say how many customers were affected, but told BleepingComputer the incident is limited to customers in France.
The University of Copenhagen in Denmark confirmed that hackers accessed one of its test environments containing personal data belonging to 525,000 people. The educational organization detected the breach last Tuesday and disclosed it on Friday. In an update yesterday, the university added another 20,000 staff and students whose PIN codes were exposed. “The University of Copenhagen has confirmed a cyber attack in which hackers gained access to one of the university’s test environments,” the university says. Founded in 1479, the University of Copenhagen is Denmark’s oldest university and one of its leading research institutions. It has approximately 36,800 students and 10,700 employees, with six faculties and more than 200 research centers. The University of Copenhagen is still investigating to determine the extent of the incident, but warns that the following information may have been exposed:
Confirm this action.
Leaving now will discard your changes.